Thermal Flow Switch
When the fluid flows,the heat of detecting resistance will be taken away,resistance is changed.the differential resistance value is used as the basis of flow velocity.
Feature
1) No moving parts,maintenance free,easy installation,a model can be suitable for a variety of pipe diameter.
2) Adjustable setting point of flow switch,extremely low pressure loss,compact structure.
3) LED light shows the flow trend and switch state.
Product Show
Specification
Feature
1) No moving parts,maintenance free,easy installation,a model can be suitable for a variety of pipe diameter.
2) Adjustable setting point of flow switch,extremely low pressure loss,compact structure.
3) LED light shows the flow trend and switch state.
Product Show
Specification
Model | FS-E01 | FS-E03 |
Application | Suitable for both gas and liquid.it can be used for pneumatic and hydraulic system,to monitor the cutoff of circulating water,cutting fluid and lubricant,and idle protection of pump,etc. | |
Medium | Water,oil,air | |
Flow rate set ranges | Water:1...150cm/s Oil:3...300 Air:20...2000cm/s | |
Connection | G1/2'',G1/4''(other customized) | |
Power supply | 24VDC | |
Switch ON | Max.400mA(PNP or NPN);Max.1A,24VAC/VDC(relay) | |
No-load current | Max.80mA | |
Probe material | SS | |
Housing material | PBT | Stainless steel |
Fluid temperature | -20~80ºC | |
Flow indicator | 6-Segments LED | |
Temperature gradient | ≤4ºC/s | |
Response time | 1-13S,typical value 2s | |
Max.fluid pressure | 100bar | |
Signal output | Relay NO+NC,NPN,PNP | |
Intialization time | 8s | |
Repeatable accuracy | ±2% measured value | |
Electric protection | Reverse phase,short circuit,overload | |
Electrical connection | M12 aviation plug,with 2meter cable(longer length available | |
Protection grade | IP67 |
Dimension & Circuit connection
ABOUT US